1. Energy saving effect of led fluorescent lamps

The brightness of 15W LED fluorescent lamps is brighter than that of traditional 40W fluorescent lamps, and the brightness of 18W LED fluorescent lamps is brighter than that of traditional 64W fluorescent lamps. The brightness of LED fluorescent lamps is especially softer and more acceptable to people. The service life is between 50,000 and 80,000 hours. The power supply voltage is AC85V-260V (AC), no starter is needed, the startup is fast, the power is low, there is no stroboscopic, and it is not easy for eyestrain. It is not only super energy-saving but also environmentally friendly. It is one of the key products developed by the national green project, and it is the main product to replace the traditional fluorescent lamp. Low power consumption, saving 60-80% of electricity than traditional fluorescent tubes.

Third, the scope of application of LED fluorescent lamps

Suitable for most indoor lighting applications, such as: homes, hotels, shopping malls, offices, schools, parking lots, warehouses, factories, supermarkets, passages, corridors and advertising boxes and other indoor lighting.

Four, LED fluorescent lamp wiring

There are two wiring methods for traditional fluorescent tubes: electronic ballasts and inductive ballasts. LED fluorescent tube wiring method: remove the ballast and/or starter, and connect the live wire and neutral wire to both ends of the bracket, respectively.

Installation instructions: Remove the starter and rectifier, and connect the live wire and neutral wire of the mains to the left and right ends of the bracket respectively. The LED tube is a built-in power supply, the two pins of the G13 interface are in a short-circuit state, and the interfaces at both ends are consistent.