The two aspects of LED energy -saving lamps are ordinary filaments. After the power of the filament is connected to the power, the electronic device can be sent out. Add a higher working voltage on both sides of the LED lamp tube to generate the electrostatic field. The lamp tube is accelerated, and the electronic flow with a certain rate and kinetic energy is generated. The LED lamp tube was pumped into a vacuum, and mercury was charged inside, which means that people call liquid mercury.

In the condition of the LED lamp pipe connected to the power supply, this liquid mercury changed from liquid volatilization to steam. The electronic devices in the electronic stream hit the mercury molecules at a certain rate, causing mercury molecules to be stimulated and turning into an electronic ion. Bremethly drops to the original situation spontaneously, and the ultraviolet light is released, UV light cannot be used for lighting lamps. Therefore, we applied some light -light chemicals in the inner cavity of the LED lamp tube and negative in ultraviolet light. Under the electronics, after being aroused by Yingguang Chemicals, it can be passed out of granted light sources, which can be used for people's lighting lamps.

At present, the more common energy -saving lamps on the market have general LED lamp tube and the three -base color lamp tube that is gradually the mainstream products. Compared with incandescent light bulbs, they often have the advantage of power saving. Different is that the color rendering index of the general LED lamp tube is slightly lower, while the three -based LED lamp tube shows of course the sun color, and the color rendering index and the high efficiency of the light are better than the general general LED lamp tube. Essence From the above, people can understand that mercury has a intermediary role in the energy -saving lamp, and it is not easy to light up without mercury LED energy -saving lamps. There are very few mercury in each LED lamp.