This product of Led line light must be connected to the line to operate normally, and in order to achieve the actual effect of the dream application, of course, everyone needs to do the corresponding wiring work. In the following, the technical line light manufacturers will explain to you some wiring methods of line lights. Come and learn together.

(1) Outlet from the top of the side: Choose one of the two sides of the linear light to punch a hole with a very different diameter for the cable. The waterproof connection will be connected to the pcb circuit board from this hole distance. To achieve seamless splicing, the actual effect of the lighting project has no shadows, and the installation is very convenient.

(2) Bottom outlet: The bottom outlet is to drill an outlet hole with a diameter that is very similar to the cable diameter on both sides of the aluminum alloy profile of the linear lamp. The basic principle is the same as the upper outlet. The line lamp at the bottom outlet is guaranteed. Seamless splicing can also hide the butt wire in the direction of the bottom end, which is more beautiful and elegant!

(3) Outlet of the pipe joint: The outlet of the pipe joint is to open an outlet hole in the core of the pipe joint piece on both sides of the linear lamp, and the installation is very convenient. The outlet of the pipe joint cannot be seamlessly connected, and the aesthetics and generosity are slightly poor in terms of the outlet at the bottom.

Led linear lights last longer. Aluminum housing and Led lamp beads increase the lifespan of the lamp, but it is key to keep an eye on the Led driver. If the Led drive is doing well, the overall lifespan will also increase. In addition, the production process of Led line lights is also very important. No matter how good the raw materials are, if the production process is not very good, it is also a product that does not meet the standards. Thus, when everything is fine, the production process is better. Next, let's take a look at many core components of Led line lights.

The aluminum profile of the Led line light should not be too thin

Led line lights or landscape lighting generally use aluminum as heat pipes to dissipate heat. The larger the total contact range between the heat dissipation of the heat pipe and the air, the better, which is beneficial to heat dissipation, the whole lamp is stable in operation, the light loss is small, and the service life is long. When the line light is applied with aluminum profiles, the thin aluminum profiles are very easy to deform. Reliable manufacturers will first consider how the heat rejection characteristics are. If you want to ensure that the aluminum profile is not easily deformed and has good heat dissipation, it needs to be properly selected.