What to do if the led electronic screen is flooded? Summer is an unpredictable season, with strong winds, heavy rains, high temperatures...For the windy season, we must do a good job of anti-fixing work on the led electronic screen, and for high temperature environments, we must take measures to cool down. What should we do to deal with the erosion of heavy rain and the flooding of the LED electronic screen? Let's look at it below:

  1. Preventive work. Although the article mainly talks about the treatment of LED electronic screen ingress, it is still necessary to remind you to do a good job of prevention, choose a good LED electronic screen manufacturer, choose a good LED electronic screen product, in addition to Carry out fine waterproof work when edging;

  2. Pay attention to the use environment, turn off the screen during heavy rain, and suspend use;

  3. After the rain stops, check whether there is water leakage from the back of the screen. If there is, do not power on, and use other tools such as fans to dry the water in the LED electronic screen as soon as possible;

  4. Aging the blow-dried screen body:

  (1) Adjust the brightness (full white) to 10%, and aging for 8-12 hours after power on.

  (2) Adjust the brightness (full white) to 30%, aging for 12 hours after electrifying.

  (3) Adjust the brightness (full white) to 60%, and aging for 12-24 hours after power on.

  (4) Adjust the brightness (full white) to 80%, aging for 12-24 hours after power on. (5) Adjust the brightness (full white) to 100%, and aging for 8-12 hours after power on.

  Do the above work, the water ingress problem of the LED electronic screen body is almost solved. In this case, you can check the LED electronic screen module, power supply, control card, wire and other problems. If you need to repair it, please do the maintenance work.