Led indoor display subtitles overlapping fault repair plan:

1. Cause analysis of subtitle overlap failure of led indoor display screen

1. The subtitles are not well debugged

2. First check whether the power supply is loose or falling off

3. Check whether the cable is firmly inserted

4. Check the connection between the module and the adapter board

5. Adapter board output problem

Two, the solution

Check to see if there are two texts in the edited subtitles that cause overlap. If the problem cannot be solved through steps 2 and 3, go directly to step 4. Because the wiring sequence of the adapter board and the module row are in a one-to-one correspondence, it is found that the modules just start from the fourth row, and there is no one-to-one correspondence. The 4-row module is connected to the 5th pin of the adapter board, and the subsequent modules can be deduced by analogy to restore the connection relationship. Steps 2, 3, and 4 are all confirmed that there is no problem, but the font overlap phenomenon is still not solved, then go to step 5 to adjust the output of the board.

There will be overlap during the first use of the LED display, follow steps 1, 2, 3, 4, and 5 to check; after a period of use, the LED display overlaps, follow steps 2, 3, and 5 to check; still can’t solve the problem , Contact the manufacturer or service provider.