With the rapid development of outdoor LED displays, manufacturers of outdoor LED displays have sprung up. How to install outdoor LED screen installation steps?

First, the screen body and the joint part of the screen body and the building must be strictly required to be waterproof and leak-proof; the screen body should take good drainage measures, and once there is accumulation of water, it can be drained smoothly.

Second, install lightning protection devices on real screens and buildings. The display body and the shell are well grounded, and the grounding resistance is less than 3 ohms, so that the large current caused by lightning can leak in time.

Third, install ventilating equipment to cool the screen so that the internal temperature of the screen is between -10 and 40°. An axial fan is installed on the screen to dissipate heat.

Fourth, choose the working temperature between -40~80, and the working temperature between -40~80° to prevent the display from being unable to start due to the low temperature in winter.

Fifth, in order to ensure long-distance visibility under ambient light conditions, ultra-high brightness light-emitting diodes must be selected.

Sixth, the display medium adopts a new type of wide-angle tube, which has a wide viewing angle, pure color, and uniformity, and the service life exceeds 100,000 hours. The external package of the outdoor LED display is currently the most popular with a cover along a square cylinder, silicone seal, no metal assembly; its appearance is exquisite and beautiful, sturdy and durable, with protection from direct sunlight, dust, water, high temperature, and circuit short circuit. specialty.