The first step in the moisture-proof LED display is to ensure that the LED module has moisture-proof function. Let us see how Winbond, which has a good brand awareness and reputation, does the moisture-proof work of the LED module.

　　LED modules need to be dry and ventilated. Use pallets or other objects to raise them during storage, and do not directly touch the ground.

　　The storage environment is equipped with a temperature and humidity monitor, and the environmental humidity is controlled below 60%RH, and the LED module is very comfortable.

　　 When the opened LED module (unit board) is stored, it needs to be repackaged and put in an appropriate desiccant.

If the LED module is stored for more than 1 month, the module will be aged for 6 hours in incremental brightness before use: full brightness is set to 10%/1 hour, full brightness is set to 30%/1 hour, full brightness is set Set it to 60%/2 hours, set the full brightness to 80%/1 hour, and set the full brightness to 100%/1 hour. After 6 hours of aging, it can be used for the whole screen assembly.

　　 outdoor LED display moisture-proof method

　　1, outdoor fixed display screen is moisture-proof

　　 Configure a temperature and humidity monitor at the installation site of the outdoor LED display to monitor the humidity around the screen in time;

　　 The first rainy day or after heavy rain after the screen body is installed, check whether there is moisture, water droplets, moisture, etc. inside;

　　Under the environmental humidity of 10%～85%RH, the screen should be turned on at least once a day, and the screen should work normally for more than 2 hours each time;

　　Environmental humidity is higher than 90%RH or when you return to the south, you should dehumidify the use environment of the screen, and ensure that the screen works normally for more than 4 hours a day.