Led line lights or garden landscape lighting generally use aluminum as heat pipes to dissipate heat. The larger the total contact range between the heat dissipation of the heat pipe and the air, the better, which is beneficial to heat dissipation, the whole lamp is stable in operation, the light loss is small, and the service life is long. When the line light is applied with aluminum profiles, the thin aluminum profiles are very easy to deform. Reliable manufacturers will first consider how the heat rejection characteristics are. If you want to ensure that the aluminum profile is not easily deformed and has good heat dissipation, it needs to be properly selected. The aluminum profile of the Led line light should not be too thin. The thinner the aluminum, the less effective the heat removal is. It is also very easy to be squeezed and deformed during the whole process of installation.

The LED light strip uses direct current and a low voltage of tens of volts, which can cultivate high-brightness light, but it is not suitable for distribution. If the chromaticity is higher, it is necessary to increase the total number of LED chips, so that the power consumption will increase. At the same time, in order to better apply the voltage, a switching power supply unit must be equipped to convert AC into DC, which is the key power energy damage.

The color of the high-quality LED wireframe lighting must be the same, and it is not easy to have white light or other lighting colors. If you don't know how to distinguish, you can teach you a little way, just illuminate these LED light switches and observe their light color changes to get the needed reference answers. Because the LED light strip is brighter, under the same conditions, it is difficult to distinguish the chromaticity of the lighting effect of the same type of lights of the two well-known brands. Easy to damage eyesight. Usually, it is recommended to cover the light source with a piece of white paper, and then compare it according to the loss of light on the white background, so that it is easy to see the difference in the chromaticity of the light, and the higher the chromaticity, the better.

The LED lights of aluminum profiles are technically designed for heat removal. Generally, the heat transfer plate method is commonly used. It is a piece of copper coin with a thickness of 5mm. , but the net weight is very large. The net weight is very critical in the system software of the street lamp head. Generally, the height of the street lamp head is six meters or more. If the weight is too heavy, the risk factor will increase, especially in the event of a strong typhoon and a major earthquake, which may cause accidents.