If the use environment is an outdoor LED floor tile screen, it will face many challenges. The LED floor tile screen will be affected by severe weather such as high temperature, cold wave, strong wind, rain, etc. If these tasks are not done well, the safe operation of the LED floor tile screen cannot be guaranteed. Today, I will tell you how to install the LED floor tile screen to prevent water leakage.

     For some products, when installed outdoors, no glue is added or no sealant is applied to the coating. After such a long time, the electronic components will definitely get water, and the screen will have problems after a long time. Moreover, the most feared by electronic components is water. Once water enters the circuit, it will inevitably cause the circuit to burn out. These problems cannot be ignored.

     When installing the LED floor tile screen outdoors, the PCB board needs to be coated and glued. The screw holes around the module and the back of the module are sealed with plugging glue, plus a special outdoor box and structure. Outdoor structure is recommended, and waterproof glue is recommended. Heat dissipation, and use a special outdoor box structure, it is recommended to be more than 40 cm above the ground, which is conducive to drainage in rainy days.