1 Standard and specifications that can be adopted and reference for high -rod lighting design and construction

JT2012-88 Lighting and Unloading Area Lighting and Seting Methods

JT/T194-95 Stacking Running Area Lift and High Ping Light Lighting Setting Specification Specification

JT/T312-1996 Later-down high-rod lighting device technical condition

CJJ45-91 Urban Road Lighting Design Code

GB7002-86 Light Lights Lighting Lighting Optical Test

GB7000-86 Lighting General Safety Requirements and Test

GB7001-85 Lighting Shell Protection Level Classification

GB 50259-96 Electric Device Installation Project Construction and Acceptance Specification

GB 50285-96 Electric Device Installation Engineering Electric Lighting Device Construction and Acceptance Specification

GBJ 135-90 Steel Tower Structure Design Code

GBJ 17-88 steel structure design specification

GB/T 13912-1992 Metal coverage layer and technical requirements for steel-made heat plating

The basic structure of 2 liter high rod lights

The lifting high rod lamp is composed of lamp rods, lamp plates (lamps), lighting lamps, lift mechanisms, electrical control devices and other parts. The light rod is made of segmented structure and welded with steel plate rolls. To facilitate transportation, each section is about 10m in length. It is made of or welded on the spot. At present, the polygon is inserted. The top of the lamp rod is equipped with lightning rods and rainproof caps, and a pulley set is equipped under the rain hat, which is used to wrap the wire rope and cable. Lights are used to install lamps. Lighting fixtures are composed of shells, anti -light, lamp holders, tempered glass, etc., and the lamps have a direct effect on the effect of high rod lighting.

The lifting mechanism is composed of motor, safety coupling, and rolling machines. The motor and rolling machine are connected by the safety coupling. When the load increases or reaches the top limit, the safety coupling will automatically slide to ensure safety. The rolling machine generally uses a snails with good self -locking performance. Some roll -up machines are equipped with spiny wheels to prevent slipping when the lamp dish is reduced. At present, the forming of the rolling machines mostly uses a single turbine, single snail, and single -rolled tube "one change three rope", which is the mechanism of a main steel wire rope strap. Galvanized wire ropes should be used, and the safety factor should not be less than 8. In order to ensure the safety of the luminous plate lift, the lifting agency should be able to keep the remote control to ensure that the personnel can carry out lift operations outside 5M. Electric control devices include lighting power switches, time control switches and various sockets.

3 anti -corrosion treatment

Copy high rod lights for serious steel anticorrosion treatment. The current commonly used treatment methods include paint, plastic, hot zinc and hot aluminum spray. In addition to ensuring the quality of anticorrosive treatment, you should also pay attention to repairs the damaged surface in the installation process in a timely manner (such as surface damage caused by welding).