1: Pay attention to the humidity of the environment around the full-color LED display, and do not let items with humidity enter the LED advertising screen. When the full-color LED display is damp, if it is powered on, its internal parts will be corroded by water vapor, which will cause irreparable damage to the full-color LED display.

2: Try to avoid situations that may be encountered, things that may pose a threat to the full-color LED display should be kept away from the screen. At the same time, when cleaning the screen, scrub gently to minimize the chance of damage.

3: Full-color LED displays are usually used more often, and daily maintenance is also a must. Regular screen cleaning work has a great effect on improving the display effect of the full-color LED display and increasing its influence.

4: The full-color LED display also requires stable power supply, and grounding protection should be done. When the weather is bad, strong wind, heavy rain, or heavy thunderstorm, the screen should be turned off and do not use it anymore.

5: The inside of the screen should be closed to prevent water and other conductive metal objects. The full-color LED display should be placed in a ventilated and dust-less environment. Large pieces of dust will not only weaken the display effect, but also damage the circuit of the full-color LED display.

6: The full-color LED display should ensure that it cannot work for more than two hours. Every seven days, the full-color LED display should be used at least once in humid and cold weather. It is recommended that the full-color LED display should be turned on more than once a month, and there must be more than 2 hours of lighting time.

7: Regularly check the full-color LED display. If any inappropriateness is found, it should be reported and repaired in time.

8: When playing the screen, try not to place the full-color LED display in the full-color high-brightness screen for a long time. This will cause excessive current in the bottle body, and the coil will easily overheat, which will damage the wick and shorten the full-color LED display. Service life.

9: The equipment that controls the full-color LED display should be placed in a separate room, and measures such as dustproof, ventilation, and refrigeration should be taken to ensure the normal and stable operation of the equipment.

10: The circuit inside the screen body is specially designed, and people without relevant knowledge are not allowed to touch it, so as to avoid all kinds of undesirable accidents. If there are any problems, the relevant professionals should be notified in time for inspection and maintenance.

The switch sequence of the full-color LED display is correct:

First print out the screen control device, and then run the screen control software. After the operation is stable, turn on the power and turn on the full-color LED display.

Turn off the screen first, then turn off the computer.